Plumbers install, maintain and repair plumbing systems that supply water and gas to, and remove waste from, homes and businesses. They work with a wide range of tools and equipment, including wrenches, pipe cutters, soldering equipment, and electronic diagnostic tools.
Commercial plumbers typically work on larger-scale plumbing systems found in office buildings, retail spaces, hospitals, and factories. Their job involves maintaining these systems and ensuring they comply with building codes and regulations. Contact Plumber Strongsville OH for professional expertise.
Backflow is a reversal of normal flow in water pipes. It can occur due to a drop in pressure on the public side of the water line caused by high demand or a water main break, as well as when a backpressure situation is created in a home or business because of a hose bib being turned on too quickly. This can cause the water to reverse direction from your pipes back into the supply line, which is a hazardous situation and needs to be prevented.
The backflow preventer is a device that stops this from happening by creating a physical barrier between the backflow source and the water supply pipes. They are commonly found in apartment and condominium buildings, restaurants, and most other commercial properties. State regulations and local municipalities require them at every cross-connection point to protect against contaminated backflow into the water supply.
Most modern plumbing fixtures have built-in backflow prevention as part of their design. For example, faucet spouts terminate above the flood rim level of sinks and bathtubs to prevent siphoning. Also, toilet fill valves and dishwasher drain connections have air gaps to keep contaminated water out of the plumbing system.
However, backflow can still happen if these protections are violated. This is why it is essential to hire a licensed backflow testing company for regular inspections. They will test the backflow preventer and ensure it is working properly. They can also repair or replace the backflow preventer if needed.
There are several types of backflow preventers used in residential and commercial building. The most common is a double check valve assembly. These are available as a testable version (which requires regular inspections) or a non-testable version, which does not. The vacuum breaker, which is most often seen on hose bibs and can be found in the form of a “DCVA” or a “PVBA”, is also an effective and inexpensive option for home owners.
Regardless of which type of backflow preventer you have, regular maintenance is required to keep it functioning properly. Visual inspections are required to identify any wear and tear that could cause a failure of the device. A leak in the backflow preventer or a discharge from the test port is an indication of a failure and should be repaired as soon as possible.
Stormwater Drainage System Installation
As the name implies, stormwater drainage systems are a network of channels and underground pipes that drain rain water away from roads, homes, buildings, cables, plumbing systems and sidewalks. They are separate from sewer systems, which carry sewage and waste water to treatment plants. A functioning storm drain system can prevent flooding and protect public and private infrastructure from damage. It can also help keep the environment clean and prevent diseases and toxins from spreading.
The most important aspect of a stormwater drainage system is its design. This is determined by hydraulic engineers and stormwater management professionals, who design solutions for a specific site. They consider factors like topography, soil types and depth, surface obstructions, and the presence of pollutants.
There are several stormwater drainage system designs, from simple residential dry wells to large municipal systems. Each design has its own unique features, but they all serve the same purpose: to collect and drain excess rainwater and groundwater from impervious surfaces such as streets, pavements, car parks, and parking lots.
A well-designed stormwater drainage system will have its outlets directed away from the point of collection to avoid contamination of downstream stormwater and waterways. This will also reduce the amount of sediment that is carried into downstream stormwater and rivers, and it will minimize the likelihood of clogging. A well-designed system will also minimize the number of discharge points, which should be a maximum of one per block.
Before the installation of a stormwater drainage system, it is important to find out where the underground service lines are located. These include electricity and fiber cable lines, as well as plumbing pipes. Depending on where the drain is to be located, it may be necessary to move or relocate these services before installing the stormwater drainage system. If this is not done, the underground lines could be damaged and may require costly repairs or replacements.
The next step is to prepare the site for construction. This involves clearing the area and removing any existing structures or obstructions that could interfere with the drain installation. It is also a good idea to check for any existing drainage systems, as these may need to be modified or moved. Finally, the location of the drains should be carefully selected to ensure that they are not in the path of flooding or erosion.
After the construction of a stormwater drainage system is completed, regular maintenance must be performed to keep it working properly. In addition to the usual tasks, such as cleaning out debris and checking for water leaks, routine maintenance may include installing a berm to protect the drain from floodwaters, re-grading the slope of the landscape to reduce erosion, and replacing old or damaged piping. If you need help constructing or maintaining your home’s drainage system, contact a plumber who has extensive experience in this area.
Copper & Brass Fittings
Copper plumbing pipes and fittings are a common feature in homes. They are known for their durability, corrosion resistance and versatility. Plumbers bind them using solder to create water-tight and durable connections. Copper and brass fittings have different properties that make them suitable for specific applications. It is important for homeowners to understand these differences so they can choose the right materials for their plumbing system.
While both copper and brass can be used in plumbing systems, they are not interchangeable. Brass is an alloy of copper and zinc, while copper is a pure metal. Brass is often used in hydraulic, pneumatic and instrumentation applications because it can withstand higher working pressures than copper tubing. It is also more resistant to atmospheric corrosion than copper. It is also easy to machine and cut with saws. Its malleability allows for it to be moulded into complex shapes, making it ideal for the production of components like Adaptor Fittings and Valve bodies.
Brass is also softer than copper, making it easier to bend and shape into fittings. It has a lower thermal conductivity than copper, meaning it takes less heat to warm up and cool down. Brass is also more resilient to corrosion, especially compared to galvanized steel or black iron. Its corrosion resistance extends to a wide range of chemicals, non-potable water and slurries. It can even withstand some corrosive industrial gases, such as hydrogen sulphide and carbon dioxide.
Both copper and brass can be joined together using a variety of different types of plumbing fittings. Compression fittings are commonly used to connect copper tubing and are easy to install and remove. They provide a strong and heat-free connection, are compatible with all pipe types and are ideal for high-pressure applications.
Using the correct type of fittings is crucial for ensuring that your plumbing system is leak-free and safe to use. When selecting the right copper or brass fittings for your home, consider your needs and budget. While some plumbing fittings are more expensive than others, they are all designed to help you get the job done right.
Soldering is a skill that takes time to perfect, but it is an essential part of any plumber’s tool kit. It is important to know the proper techniques when soldering copper or brass. First, ensure that the two pipes you are connecting are clean and free from burrs. Then, brush on some plumbing flux before pushing them together. Next, heat the fittings with a torch and drip on some liquid or reflowable solder to make a secure connection. Always wear protective gloves when working with any type of soldering materials. Once the joint is made, make sure to wipe down any excess solder to prevent it from sticking to your fingers or skin.